how to upgrade macbook pro hard drive to ssd 2011

This took me 10 minutes of frustration and I had to stand the iMac back up to do it and see what I was doing. Once installed you can put the connectors back in place and start screwing some screws to keep it in place.įinally, reconnect all the connectors and tighten all screws that were removed prior. Install the LCD and tighten the 8 screws. Use a dust canister to remove any dust that may be on the glass or LCD screen.Īlthough I left this section short. Connecting all the connectors was straight forward. STEP 9: INSTALL OS-X OR RESTORE BACKUP TO SSD Should you get confused, look at the pictures above to verify the correct placement. I restored my previous installation onto the new SSD harddrive using 'Time Machine'. To do this, insert your OS-X installation CD that came with the iMac. Click 'Utilities' and click restore from 'Time Machine'. If you prefer, you can install from scratch using the installation CD. #MACBOOK PRO 2011 HARD DRIVE UPGRADE SSD INSTALL# Trim is required for most SSDs to operate efficiently during data writes. Apple only enables TRIM on their own specific SSDs. I recommend enabling TRIM to achieve optimum data rates, unless you are sure your SSD has sufficient garbage collection.

DO NOT USE TRIM ENABLE APP! I have seen issues with this and it is too generic. Instead, use some good old UNIX commands. Open up the Terminal and type the following. #MACBOOK PRO 2011 HARD DRIVE UPGRADE SSD FREE#.#MACBOOK PRO 2011 HARD DRIVE UPGRADE SSD FULL#.#MACBOOK PRO 2011 HARD DRIVE UPGRADE SSD INSTALL#.#MACBOOK PRO 2011 HARD DRIVE UPGRADE SSD HOW TO#.

How to upgrade macbook pro hard drive to ssd 2011